RCBO 2P 20A 30mA DZ47LE-63

The DZ47LE – 63 series residual current circuit breakers (RCCBs) are suitable for circuits with an alternating current of 50Hz, a rated operating voltage of 230V for single – pole two – wire and two – pole configurations, and 400V for three – pole, three – pole four – wire, and four – pole configurations, with a rated current up to 63A. They are used to provide indirect contact protection for personnel and overcurrent protection for building lines and similar applications. They can also protect against fires caused by persistent earth faults when overcurrent protection devices fail to operate. RCCBs with overvoltage protection can additionally protect against excessive voltage caused by power grid faults.

The picture is RCBO 2P 20A 30mA DZ47LE-63
This series of products is increasingly being used as a backup protection for earth faults, direct contact, and indirect contact electric shock in low – voltage power distribution systems.
The picture is RCBO 2P 20A 30mA DZ47LE-63 It adopts high-temperature resistant insulating materials, comes with complete safety certifications, and complies with industry standards
The products comply with the standards of GB 16917 – 1 and IEC 61009 – 1

Feature

High breaking capacity
Strong applicability of attachments
Small volume
Anti slip design
Stable and reliable

selection


DZ47LE	-	63	1P+N	C	20	30mA	AType
Model		Shell grade current	Pole	Tripping characteristics	Rated current	Rated residua operating	Type

Residual Current Operated Circuit Breaker	_	63	1P+N	B C D	6,16,20 25,32 40,50 63	Default:30mA 100mA 300mA	Default:AC Type A Type

Main Technical Parameters


Model	DZ47LE-63
Electrical features	Poles	P	1P+N
	Type(wave form of the earth leakage sensed)		AC、A
	Thermomagnetic release characteristic		B,C,D
	Rated current In	A	6,10,16,20,25,32,40,50,63
	Rated voltage Ue	V	230
	Rated sensitivity I△n	A	0.03,0.1,0.3
	Rated residual making and breaking capacity I△m	A	630
	Rated short-circuit capacity Icn	A	6000
	Break time under I△n	S	≤0.1
	Rated frequency	HZ	50/60
	Rated impulse withstand voltage(1.2/50)Uimp	V	4000
	Dielectric test voltage at ind.Freq.for1min	Kv	2
	Insulation voltage Ui	V	500
	Pollution degree		2
Mechanical features	Electrical life	t	10000
	Mechanical life	t	20000
	Contact position indicator		Yes
	Protection degree	t	IP20
	Ambient temperature(with daily average≤35℃)	℃	-5~+40
	Storage temperature	℃	-25~+70
Installation	Terminal connection type		Cable/Pin-type busbar
	Terminal size top/bottom for cable	mm²	25
		AWG	18-3
	Terminal size top/bottom for busbar	mm²	25
		AWG	18-3
	Tightening torque	N*m	2
		In-Ibs	18
	Mounting		On DIN rail EN60715(35mm)by means of fast clip device
	Connection		From top